Hunza® Metal Halide Bollard
The Hunza® Metal Halide Bollard is available in both 20 Watt or 35 Watt MR16 Metal Halide lamps with associated integral, electronic ballast.
This luminaire is ideal for garden edges, walkways and driveways.
The lens reflects light at two angles through an anti-glare mesh directly onto the ground and horizontally to illuminate the surrounding landscape.
The Metal Halide lamp is a highly energy efficient light source, using considerably less energy, having a considerably longer lamp life and outputting 2-3 times the light of a halogen lamp.
Lifetime Warranty on Lens Breakage
Power Supply:
Ballast built in: 230/240 volt AC 50Hz |
|
Available Options & Finishes:
Copper, 316L Stainless Steel and Powdercoated Aluminium:
BOL/MH Bollard Metal Halide (Spike Mounted)
BOL/MH/FM Bollard Metal halide (Surface Flange Mounted) |
|
Accessories:
CJK150 – Cable Joint Kit (available in single kits or packs of 5)
LENS/OPAQUE – Opaque Lens for PGL/BOL/FN/TL
BGH – Bollard Hood c/w Acrylic Lens & Cone (not currently available in Stainless Steel) |
| Lens:
UV stable acrylic with anti-glare mesh and dual-angle reflector. |
|
Lamp:
Lamp Base – GX10
20 Watt version – Supplied with MR16 20W Metal Halide Lamp
Colour Temperature – 3,000K
Lamp Life – 12,000 hours
35 Watt version – Supplied with MR16 35W Metal Halide Lamp
Colour Temperature – 3,000K with Lamp Life of 12,000 hours
Colour Temperature – 4,000K with Lamp Life – 10,000 hours |
|
Approved To The Following Standards:
AS/NZS 60598.2.2
IP66
UL1598/CSA |
Specification Sheet