Hunza Pond Lite

Hunza Pond Lite

The Hunza Pond Lite, when used to light a waterfall, creates life in the water and brings serenity to the surroundings.

The standard Hunza Pond Lite is fully submersible and has an adjustable head via side pivot points. Tested and approved to IP68 making this the best choice for exterior lighting schemes that include lighting water features.

The weighted version has a heavy base allowing the luminaire to be placed in a pond instead of being fixed into place. Drilling fixing holes may cause the pond to leak, so Hunza have specifically designed this underwater light for this purpose.

Machined from 10mm thick aluminium with a UV stable powdercoated finish, machined from solid copper or 316 stainless steel, stainless steel cap screws, clear tempered glass lens and high temperature silicon gaskets and is complete with three metres of submersible cable. Other lengths are available on request.

This low voltage luminaire is suitable for use with MR16 – 20, 35 or 20 watt lamps and is supplied with a high quality European lamp.

NB: Pool chemicals, hard water or salt water may damage the powdercoated finish. Stainless steel fittings should be used in these situations. Copper luminaires are not suitable in a pond with fish.

Suitable for use with PureLED or retro fit LED lamps.

Finishes [?]

Eco Matt Powdercoat Colours [?]

Specifications

LED Chip: Cree XHP-50-2 Plug and Play field replaceable LED board
Output: 600 Lumens @ 1050mA
Lumens Per Watt: 100 Lumens @ 6 watts
Colour Temperature: 2700K, 3000K, 4000K
CRI Warm White (3000°K): 90+
Beam Angles: 15°, 25°, 38°, 60°
Ingress Protection: IP68
Standards: AS/NZS 61046, UL 1838, 2108, CSA C22.2 No. 250.7, 250.0-08, CE
Recommended Power Supply: Remote (Series) Driver, Retro 110/240 volt driver

Downloads

Underwater Lighting Range


Pond Lite Effects


Comments are closed.