Modux Four Recessed Square Louvre

The Modux Four Recessed Square Louvre is a low-voltage dimmable outdoor washer producing an attractive wash of light. Often used to illuminate stair treads.

Precision machined in marine grade 316 stainless steel, copper or powdercoated aluminium, the luminaire achieves IP68 water ingress rating for peace of mind.

The Cree 4 watt LED can be easily replaced if required or substituted for a colour LED. It is not nesessary to specify any beam angles as the luminaire has been optimised for you.

The stainless steel version is quite a nautical theme, while the copper version looks very much at home recessed into timber.

Large Recessed Square Louvre version also available.

Also available in the Modux Two range.

Finishes

LED Colours







Modux Four RGBW Recessed Square Louvre

LuxR is now able to offer their highly successful Modux Four range of luminaires with integrated Red, Green, Blue, White colour changing LED. This system uses DMX signal protocol and DMX-spec cabling. The topology employed to connect the LuxR RGBW fittings together is a bussed (a kind of parallel arangement) network. Technical notes on bussed networks can be found here. DMX is very fussy about cabling quality and we recommend you specify the required cable length for each luminaire ordered.

Finishes & LED Colours

Specifications

Input Current: 700mA
Forward Voltage: 6Vf
Power: 4 Watt
Efficacy: 100 lm/W
Colours: 2700°K, 3000°K, 4000°K, 5000°K
CRI [3000°K]: 85
Beam: Asymmetric wash
Glass Lenses: Frosted
Standards: IP68, LM79, CE UL1838
Light Engine: Plug-in dimmable module equipped with Cree MTG-2 LED
Driver: Remote constant current driver required, or LuxR Integral 12V AC driver
Spec Sheet: Modux Four.pdf
Exploded View.pdf

RGBW Specifications

Input: 12-24V DC , DMX Data+ , Data- , Data shield
Power Consumption: 4.5W per luminaire maximum (4 colours @ 100%)
Light Engine: Plugin dimmable module equipped with a high power Cree 4×1 watt RGBW LED
Beam [FWHM]: Spot 20°, Medium 34°, Oval 48°x24°
Cabling: Special hybrid cable comprising of : EIA-485 (aka RS-485) compliant 120 Ohm twisted pair with drain wire in a foil shield. A pair of marine grade tinned 0.75mm^2 DC power conductors. The product is supplied with a 3 metre (9.8 ft) cable.
Standards: IP68, LM79, CE , USITT DMX512-A

Modux Four Range

Spike:

Pond:

Recessed:

Large Recessed:

Surface Mounted:

Comments are closed