|
The Dual Liter is the hybrid child of the Pillar Lite and Pagoda Lite, taking advantage of both G4 and MR16 light sources. By utilising the Pagoda Lite G4 lamp and lens on the top of the Pillar Lite broadens the applications and potential for this
exterior lighting product. Offering two different lighting effects in one luminaire;
-
a spread effect from the 20
watt G4 capsule and acrylic lens, (supplied as standard with mesh insert to reduce glare).
-
a shaft of light from the 20 watt MR16 light source.
It is machined from 10mm thick
aluminium with a UV stable powder coated finish
(standard colours bronze, green, matt black and silver)
or solid copper or 316 stainless steel, clear tempered
glass lens and high temperature silicon gaskets.
This low voltage landscape lighting
product is suitable for use with an 2 x 20 watt lamps and is supplied with a
20 watt high
quality MR16 European 5000 hour lamp and a 20 watt
G4 capsule European 3000 hour lamp.
Accessories:
CJK150 -
Cable
Joint Kit (available in single kits or packs of 5)
LENS/DSTEP-FR -
Frosted Lens
GG/### -
Glare Guard
HCL/### -
Hex Cell Louvre
LENS/OPAQUE - OPAQUE Lens for PGL/BOL/FN/TL
LED/LP-## -
MR16 LED
(available in Warm White, Cool White) as a replacement
for the Dichroic lamp only
Power Supply: Light Ideas T-20 or HUNZA® Buriable
IG20 safety isolating transformer (single installation),
multi installation with any of the
Light Ideas transformer
range or
HUNZA® IG safety isolating
transformers, alternatively the HUNZA® Wall Mount series
WMl00 - WM3OO Double Insulated Safety Isolating
Transformers.
Lifetime Warranty on Lens Breakage
Available options & finishes:
Copper, 316L Stainless Steel and
Powdercoated Aluminium:
PIL/PGL
Dual Liter (Pillar Pagoda Lite)
PIL/PGL-R
Dual Liter (Pillar Pagoda Lite) Retro (Integral Elec. Transformer)
RETRO™ Fit Installation
An installation where mounting a transformer is a
problem, e.g. a brick wall where there is only the cable
protruding out of the wall and it is not an option to
recess the transformer or when replacing an existing
light fitting. The Retro option is available with an approved
240/250 AC encapsulated IP66 dimmable transformer built
into the base. The base size increases to 78mm diameter
and 48mm deep.
|
