Hunza Step Lite Louvre
The Hunza Step Lite Louvre has a 88mm diameter flange with a thickness of only 3mm giving this Hunza Steplighting product a ‘flush to the surface’ look with no protrusions. The Louvre design shades the face of the lamp, so the Step Lite Louvre is an ideal product for installing into a step-face.
The body is machined from 9mm solid copper or 316 stainless steel, it has a tempered glass lens with high temperature silicon gaskets and is supplied with a maximum 20 watt lamp. The standard low voltage luminaires are suitable for use with an MR16 – 20 watt lamp (max) and is supplied with a high quality European lamp.
The Step Lite has mounting holes as standard, but if you install using a canister there would be no need. Hunza mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O-rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations.
Suitable for use with PureLED or retro fit LED lamps.
|LED Chip:||Cree MTG-2 Plug and Play field replaceable PCB boards|
|Output:||600 lumens @ 1050mA|
|Lumens Per Watt:||100 Lumens @ 6 watts|
|Colour Temperature:||2700K, 3000K, 4000K|
|CRI Warm White (3000°K):||85+ Standard, 90+ Optional|
|Beam Angles:||15°, 25°, 38°, 60°|
|Standards:||AS/NZS 61046, UL 1838, CSA C22.2 No. 250.7|
|Recommended Power Supply:||Remote (Series) Driver, Retro 110/240 volt driver|